Tan, Z.-Okay. et al. Shiny light-emitting diodes based mostly on organometal halide perovskite. Nat. Nanotechnol. 9, 687–692 (2014).
Kim, Y.-H. et al. Multicolored natural/inorganic hybrid perovskite light-emitting diodes. Adv. Mater. 27, 1248–1254 (2015).
Cho, H. et al. Overcoming the electroluminescence effectivity limitations of perovskite light-emitting diodes. Science 350, 1222–1225 (2015).
Fakharuddin, A. et al. Perovskite light-emitting diodes. Nat. Electron. 5, 203–216 (2022).
Kim, J. S. et al. Extremely-bright, environment friendly and secure perovskite light-emitting diodes. Nature 611, 688–694 (2022).
Han, T.-H. et al. A roadmap for the commercialization of perovskite gentle emitters. Nat. Rev. Mater. 7, 757–777 (2022).
Kong, L. et al. Fabrication of red-emitting perovskite LEDs by stabilizing their octahedral construction. Nature 631, 73–79 (2024).
Shin, M. et al. Modulation of progress kinetics of vacuum-deposited CsPbBr3 movies for environment friendly light-emitting diodes. ACS Appl. Mater. Interfaces 12, 1944–1952 (2020).
Abzieher, T. et al. From groundwork to environment friendly photo voltaic cells: on the significance of the substrate materials in co-evaporated perovskite photo voltaic cells. Adv. Funct. Mater. 31, 2104482 (2021).
Luo, J. et al. Vapour-deposited perovskite light-emitting diodes. Nat. Rev. Mater. 9, 282–294 (2024).
Li, J. et al. Environment friendly all-thermally evaporated perovskite light-emitting diodes for active-matrix shows. Nat. Photon. 17, 435–441 (2023).
Svane, Okay. L. et al. How sturdy is the hydrogen bond in hybrid perovskites? J. Phys. Chem. Lett. 8, 6154–6159 (2017).
Maufort, A. et al. Elucidating the non-covalent interactions that set off interdigitation in lead-halide layered hybrid perovskites. Inorg. Chem. 63, 5568–5579 (2024).
Wang, L. et al. Impact of post-annealing on thermally evaporated reduced-dimensional perovskite LEDs. Appl. Phys. Lett. 120, 081107 (2022).
Du, P. et al. Environment friendly and large-area all vacuum-deposited perovskite light-emitting diodes by way of spatial confinement. Nat. Commun. 12, 4751 (2021).
Dong, Z. et al. Intermediate section evolution for secure and oriented evaporated wide-bandgap perovskite photo voltaic cells. Nat. Mater. 25, 635–642 (2026).
Bu, T. et al. Modulating crystal progress of formamidinium–caesium perovskites for over 200 cm2 photovoltaic sub-modules. Nat. Power 7, 528–536 (2022).
Park, S. M., Abtahi, A., Boehm, A. M. & Graham, Okay. R. Floor ligands for methylammonium lead iodide movies: floor protection, energetics, and photovoltaic efficiency. ACS Power Lett. 5, 799–806 (2020).
Dunlap, J. H. et al. Steady stream synthesis of pyridinium salts accelerated by multi-objective Bayesian optimization with lively studying. Chem. Sci. 14, 8061–8069 (2023).
Xiong, S. et al. Decreasing nonradiative recombination for extremely environment friendly inverted perovskite photo voltaic cells by way of a synergistic bimolecular interface. Nat. Commun. 15, 5607 (2024).
Brown, A. A. M. et al. Self-assembly of a strong hydrogen-bonded octylphosphonate community on cesium lead bromide perovskite nanocrystals for light-emitting diodes. Nanoscale 11, 12370–12380 (2019).
Fu, G. et al. Impact of intramolecular geometry in phosphonic acid on floor passivation and lead immobilization in perovskite photo voltaic cells. ACS Power Lett. 10, 5457–5465 (2025).
Xiao, Z. et al. Environment friendly perovskite light-emitting diodes that includes nanometre-sized crystallites. Nat. Photon. 11, 108–115 (2017).
Wang, Okay. et al. Suppressing section disproportionation in quasi-2D perovskite light-emitting diodes. Nat. Commun. 14, 397 (2023).
Kim, N. et al. Extremely environment friendly vacuum-evaporated CsPbBr3 perovskite light-emitting diodes with {an electrical} conductivity enhanced polymer-assisted passivation layer. ACS Appl. Mater. Interfaces 13, 37323–37330 (2021).
Vaynzof, Y. The way forward for perovskite photovoltaics—thermal evaporation or resolution processing? Adv. Power Mater. 10, 2003073 (2020).
Wang, Z. et al. Thermally evaporated metallic halide perovskites and their analogues: movie fabrication, purposes and past. Small Strategies 9, 2301633 (2025).
Kim, B.-S., Gil-Escrig, L., Sessolo, M. & Bolink, H. J. Deposition kinetics and compositional management of vacuum-processed CH3NH3PbI3 perovskite. J. Phys. Chem. Lett. 11, 6852–6859 (2020).
Wooden, C., Li, H., Winget, P. & Brédas, J.-L. Binding modes of fluorinated benzylphosphonic acids on the polar ZnO floor and affect on work operate. J. Phys. Chem. C 116, 19125–19133 (2012).
Wagstaffe, M. et al. An experimental investigation of the adsorption of a phosphonic acid on the anatase TiO2(101) floor. J. Phys. Chem. C 120, 1693–1700 (2016).
Yang, L. et al. Modulating binding power and acidity of benzene-derivative ligands permits environment friendly and hysteresis-free perovskite/silicon tandem photo voltaic cells. Angew. Chem. Int. Ed. 64, e202500350 (2025).
Park, S. et al. Changing standard battery electrolyte components with dioxolone derivatives for high-energy-density lithium-ion batteries. Nat. Commun. 12, 838 (2021).
Liang, J. et al. A gradient oxy-thiophosphate-coated Ni-rich layered oxide cathode for secure all-solid-state Li-ion batteries. Nat. Commun. 14, 146 (2023).
Zhao, B. et al. Environment friendly light-emitting diodes from mixed-dimensional perovskites on a fluoride interface. Nat. Electron. 3, 704–710 (2020).
Warby, J. H. et al. Revealing elements influencing the operational stability of perovskite light-emitting diodes. ACS Nano 14, 8855–8865 (2020).
Jang, Okay. Y., Chang, S. E., Kim, D., Yoon, E. & Lee, T. Nanocrystalline perovskites for shiny and environment friendly light-emitting diodes. Adv. Mater. 37, 2415648 (2025).
Frohna, Okay. et al. The affect of interfacial high quality and nanoscale efficiency dysfunction on the soundness of alloyed perovskite photo voltaic cells. Nat. Power 10, 66–76 (2024).
Xing, G. et al. Transcending the sluggish bimolecular recombination in lead-halide perovskites for electroluminescence. Nat. Commun. 8, 14558 (2017).
Jiang, Y. et al. Decreasing the affect of Auger recombination in quasi-2D perovskite light-emitting diodes. Nat. Commun. 12, 336 (2021).
Jeong, S.-H. et al. Characterizing the effectivity of perovskite photo voltaic cells and light-emitting diodes. Joule 4, 1206–1235 (2020).
Kresse, G. & Furthmüller, J. Environment friendly iterative schemes for ab initio total-energy calculations utilizing a plane-wave foundation set. Phys. Rev. B 54, 11169–11186 (1996).
Kresse, G. & Furthmüller, J. Effectivity of ab-initio complete vitality calculations for metals and semiconductors utilizing a plane-wave foundation set. Comput. Mater. Sci. 6, 15–50 (1996).
Kresse, G. & Joubert, D. From ultrasoft pseudopotentials to the projector augmented-wave technique. Phys. Rev. B 59, 1758–1775 (1999).
Blöchl, P. E. Projector augmented-wave technique. Phys. Rev. B 50, 17953–17979 (1994).
Perdew, J. P., Burke, Okay. & Ernzerhof, M. Generalized gradient approximation made easy. Phys. Rev. Lett. 78, 1396 (1997).
Grimme, S., Antony, J., Ehrlich, S. & Krieg, H. A constant and correct ab initio parametrization of density purposeful dispersion correction (DFT-D) for the 94 parts H-Pu. J. Chem. Phys. 132, 154104. (2010).
Kim, Y. Y., Kim, J. & Kim, N. pGIXS: PLS-II 3C SAXS beamline information plot program with MATLAB. Zenodo https://doi.org/10.5281/zenodo.7042272 (2022).
De Mello, J. C., Wittmann, H. F. & Buddy, R. H. An improved experimental willpower of exterior photoluminescence quantum effectivity. Adv. Mater. 9, 230–232 (1997).
Wei, Z., Dubajic, M., Chosy, C., Kahmann, S. & Stranks, S. D. Photoluminescence microscopy of optoelectronic supplies. Nat. Rev. Strategies Prim. 5, 37 (2025).
