🪞 Shreemant Dagdusheth Ganpati – Royal Blessing Version・ STL File for 3D printing・Cults

Impressed by the long-lasting and beloved Shreemant Dagdusheth Ganpati of Pune, this sculpture captures the divine presence of one in all India’s most revered types of Lord Ganesha.

This design displays:
• Royal temple aesthetics
• Deep religious symbolism
• Extremely-rich decorative craftsmanship

Each element—from the crown, prabhavali (halo), jewellery, to the seated posture—is fastidiously sculpted to ship a lifelike divine expertise.

⚙️ DESIGN HIGHLIGHTS
• Iconic Dagdu Sheth type mukut (crown)
• Sacred lotus holding posture
• Conventional abhaya mudra (blessing hand)
• Detailed mushak vahan with plaque
• Wealthy layered jewellery for brass casting perfection
• Sturdy base design for stability + premium really feel

🧾 🔧 PRINTING INSTRUCTIONS (FDM + Resin Prepared)

🧱 GENERAL SETTINGS (ALL PRINTERS)
• File Format: STL
• Beneficial Dimension: 150 mm (6 inch) minimal
• Scaling: Secure as much as 200–300% with out points
• Orientation: Slight tilt backward (10–15°)

👉 Purpose: protects trunk + reduces help marks on face

⸻

🖨️ FDM PRINT SETTINGS (PLA / ABS)

⚙️ High quality Setup
• Layer Top: 0.12 – 0.20 mm
• Nozzle: 0.4 mm (really useful)
• Partitions: 3–4 perimeters
• Prime/Backside Layers: 5–6 🧱 Infill
• 10–15% (Gyroid or Grid)
• Enhance to twenty% if scaling giant (>10 inch)

⸻

🌡️ Temperature
• PLA: 200–210°C
• Mattress: 55–60°C

⸻

🪜 Helps (IMPORTANT)
• Helps: YES (Tree helps really useful)
• Overhang Threshold: 50–55°
• Help Placement:
• Underneath trunk
• Underneath palms (lotus space)
• Base edges

👉 Keep away from helps on:
• Face
• Crown entrance

⸻

📐 Orientation (VERY IMPORTANT)

👉 Finest Place:
• Slight tilt backward
• Base flat on mattress

This provides:
• Higher face high quality
• Cleaner entrance detailing

⸻

💎 RESIN PRINT SETTINGS (Beneficial for DETAIL)

⚙️ High quality
• Layer Top: 0.03 – 0.05 mm
• Publicity: As per resin (2–3 sec typical)

⸻

🧱 Helps
• Use gentle helps on entrance
• Medium helps on:
• Again
• Base
• Halo (prabhavali)

👉 Add guide helps beneath:
• Trunk tip
• Lotus stems

⸻

📐 Orientation
• Tilt: 25–35° backward
• Maintain face barely upward

👉 Prevents suction + improves element

⸻

✂️ POST PROCESSING

FDM:
• Gentle sanding (220 → 400 grit)
• Non-obligatory primer spray
• Dry brush for gold impact

⸻

Resin:
• Wash (IPA)
• Remedy correctly (5–10 min UV)
• Sand help marks flippantly
• Prime + paint