👑 Genshin Affect — Tsaritsa Anastasia Fedorovna Tiara / Crown for Cosplay・ STL File for 3D printing・Cults

Excessive-quality, extremely detailed 3D printable mannequin of Tsaritsa Anastasia Fedorovna’s tiara (crown) from Genshin Affect. This mannequin was designed from scratch particularly with cosplayers and prop makers in thoughts. The geometry options sharp, clear edges, crisp particulars, and chic curves that completely seize the majestic in-game look.

Specs:
Dimensions: 213 mm x 227 mm x 29 mm (Suits a normal grownup head dimension; simply scalable in your most well-liked slicer).
Materials Consumption:Approx. 70 grams of filament (relying in your infill and wall settings).

To make sure the tiara survives intense cosplay conventions, picture classes, and transportation, please observe these pointers:
Sturdiness Tip: Because of the elegant, slender peaks and sharp pointed ideas, it’s extremely advisable to extend your Infill to 25%–40% and set your Wall Rely (Perimeters) to three or 4 strains. A dense print will make the crown strong and stop the highest factors from snapping beneath stress.
Materials: PLA is ideal for simple sanding, priming, and portray. PETG or ABS can be utilized should you require extra flexibility or warmth resistance.
Layer Top: 0.12 mm – 0.16 mm for easy curves and minimal post-processing.
Helps: Wanted. Tree/Natural helps are extremely advisable for clear overhangs and simple removing with out damaging the sharp particulars.
What you get:
Prepared-to-print 3D file (.STL/.OBJ) optimized for any slicer (Cura, PrusaSlicer, Bambu Studio, OrcaSlicer).