🧲 Magnetic XR30 Mild shade・ STL File for 3D printing・Cults

It is a 3D printed gentle shade for Radion XR30 lights. It makes use of 6x3mm cylindrical magnets (6 items).

The information appended are fashions of the shade as an entire unit and a mannequin break up in a number of components. When you have a large enough printer then you should utilize the entire mannequin. If you do not have a large enough printer, then you possibly can print utilizing the break up mannequin.

To print the break up mannequin, your printer ought to have not less than 30cm diagonal of printing area. You want to print 2 lengthy sides and a couple of quick sides. You’ll then want to connect every of the 4 sides collectively. Silicon or superglue will work properly and to carry it in place whereas it glues, clothes pegs work properly.

To print the entire mannequin you want a print mattress of not less than 21.5×31.5cm.

For each fashions, the magnets are friction fitted. It’s possible you’ll have to sand out or glue in case your magnets usually are not precisely 6mm in diameter. Attempt to buy larger high quality magnets for these shades. Be certain to check the polarity of the magnets in your gentle in order that they really appeal to and insert them into the shade with the identical orientation.

In case you are primarily based in Australia and should not have a 3d printer, I can print it for you. Message me for particulars.
Please let me know when you have any issues

Black PLA or PETG at most
100percentinfill