🌬️ Ohmu – Printable Mannequin from Nausicaä of the Valley of the Wind・ 3D File for 3D printing・Cults

Impressed by the legendary anime Nausicaä of the Valley of the Wind by Hayao Miyazaki, this Ohmu isn’t only a show determine — it is a absolutely articulated mannequin, the results of practically three months of modeling and testing.

Mannequin Options
Articulated Legs: The entrance and aspect limbs might be manually adjusted to create a lifelike motion impact.
Shade-Altering Eyes: The eyes are printed from two separate hemispheres, permitting you to simply swap between peaceable blue and aggressive purple — relying on the temper.
Detailed Physique: The shell, textures, and proportions have been recreated as precisely as attainable — throughout the limits of FDM printing.

Mannequin Dimensions
Size: 22 cm (≈ 8.66 in)
Width: 10 cm (≈ 3.94 in)
Peak: 10 cm (≈ 3.94 in)

Technical Information
All elements are printed individually and assembled by hand.
Helps: Not required
Optimized for FDM 3D printing

Good for Studio Ghibli followers, collectors, and 3D printing fanatics.
The mannequin assembles simply and appears wonderful each unpainted and absolutely custom-made.

Share your model of Ohmu and don’t neglect to tag us:
#printedgeua

For private use solely.
Resale, redistribution, or sharing of the file is strictly prohibited.
Completely happy printing!

⚠️ Age Warning: Not appropriate for youngsters beneath 5 years previous — incorporates small elements.

Print Settings
Filaments: Elegoo PETG, Elegoo PLA, Kingroon PLA
Printer: Elegoo Neptune 4 PRO
Helps: OFF
Nozzle: 0.4 mm
Layer Peak: 0.20 mm
Infill: 15%
Scale: 100%
Slicer: OrcaSlicer

Suggestions
Nice for customized portray.
May be scaled (examined ±10%), however:
– Prints greatest at 100% scale or increased for optimum articulation and element.
– Cutting down will not be really useful – small elements like eyes and legs change into tougher to work with.
If the legs fuse throughout printing, cut back line width to 0.4 mm or much less.