Let’s try the NewBeeDrone AcroBee75 BLV5 BNF on this evaluation, a 2S Tiny Whoop designed for each indoor and out of doors flying. This drone is constructed across the newest BLV5 flight controller, that includes the STM32G474 MCU and MPU6000 gyro. Notably, it integrates the first-ever built-in ExpressLRS range receiver in an AIO whoop flight controller, making it a standout in its class.
Study extra about Tiny Whoop in my purchaser’s information: https://oscarliang.com/best-tiny-whoop/
The place to Purchase
Get the Acrobee75 from NewBeeDrone: https://oscarliang.com/product-k69l
Equipment within the field:
- AcroBee75 BLV5 Drone
- NewBeeDrone Azi 40mm Tri-Blade Propellers
- Accent Pack (spare screws and zip ties)
- Fast Begin Information
- Stickers
Batteries usually are not included, get them right here: https://s.click on.aliexpress.com/e/_DdND8Op
Get some spare propellers too: https://oscarliang.com/product-xi7f
Specs
- Body: NewBeeDrone 75mm Cockroach75
- Propeller: NewBeeDrone Azi 40mm (Tri-Blade) Micro
- Flight controller: BeeBrain BLV5
- Motors: Move 0804 14000KV
- Digicam Mount: Goober Cover V2
- Digicam: Runcam Nano 4
BLV5 Flight Controller Specs:
- MCU: STM32G474
- Gyro: MPU6000
- 4in1 ESC: 18A, Firmware goal Z-H-40, Preloaded with Bluejay 0.19.2 48kHz
- Receiver: TCXO ELRS 2.4GHz Range Receiver (UART)
- VTX: 25mW / 100mW / Good-Max (400mW)
- Motor Plug: JST-1.0 3Pin
- Receiver: Constructed-in TCXO Crystal Oscillator ExpressLRS 2.4GHz Range Receiver (UART Base)
- Flight Management Weight: 5.8g
- Flight Management Dimension: 29x29x7.6mm / 25.5×25.5mm
- Battery Enter: 1S-2S
- UART1: 0.84pin JST
- UART3: Free
- UART4: Free
Body and Sturdiness
Not like most 75mm whoops that rely solely on plastic frames, the AcroBee75 incorporates a mixture of carbon fiber and plastic. This design enhances the stiffness of the body, lowering vibrations from the motors, which not solely improves sturdiness but additionally positively impacts flight efficiency. The carbon fiber, which is about 1mm thick, supplies a strong spine with out considerably including to the burden.
Whereas the body is pretty sturdy, after a couple of onerous crashes, the plastic components might bend off form. Luckily, it’s straightforward to reshape them by hand. You may also use a hairdryer to softly warmth the plastic, maintain it in place whereas it cools, making it simpler to revive its unique form. The carbon fiber, nevertheless, held up flawlessly all through my check flights, which is a promising signal for the long-term sturdiness of the drone.
Elements
At first look, the AcroBee75 seems to be much like its predecessor, but it surely’s full of new {hardware} and now helps 2S enter, giving it extra energy.
The AcroBee75 BLV5 packs quite a lot of tech right into a small type issue.
One of many standout options is the flight controller, which integrates a VTX with variable energy ranges. It gives 25mW for racing, 100mW for freestyle, and a Good-Max mode that reinforces output as much as 400mW for long-range flying. Utilizing the FPV vary estimator (https://oscarliang.com/js/fpvrange.html), and with a 9dBi patch antenna, you would theoretically obtain a spread of as much as 2km on the 400mW setting beneath ultimate circumstances.
A shocking addition is the twin antenna setup on the flight controller, which I haven’t seen earlier than on a whoop. This built-in ExpressLRS range receiver is probably going the primary of its sort on a whoop flight controller. One antenna is mounted horizontally, whereas the opposite is positioned vertically within the body, making certain optimum sign reception regardless of the drone’s orientation.
Nonetheless, having a range receiver on a tiny whoop could be overkill since we usually don’t fly these small drones lengthy distances. ExpressLRS excels at lengthy vary, even a single antenna receiver would probably suffice for this function. I hope NewBeeDrone places this flight controller to good use sooner or later, maybe in a micro FPV drone designed particularly for long-range flights.
The FPV digicam is the Runcam Nano4, housed in NewBeeDrone’s Goober Cover V2, offering a sturdy and compact setup. The motors are Move 0804 14,000KV, outfitted with twin ball bearings, which ought to provide smoother and longer-lasting efficiency in comparison with bushings. The propellers are NewBeeDrone Azi 40mm tri-blades, and also you get an additional set within the field, which is at all times a pleasant contact.
Battery and Weight
The AcroBee75 BLV5 makes use of a 2S LiPo/LiHV battery with an XT30 connector, and includes a light-weight, versatile 3D-printed TPU battery holder. This mount is designed to securely maintain numerous battery sizes in place, even throughout crashes, providing versatility for various flying kinds.
Nonetheless, the mount is designed for particular battery sizes. The inventory holder is designed for 2S 450mAh batteries, whereas a spare mount included within the package deal suits a 2S 850mAh. The mount is hooked up with 4 screws, so if you wish to change to a unique battery measurement, you’d need to swap out the mount, which generally is a bit inconvenient within the subject. Fortunately, I discovered the bigger 850mAh mount is versatile sufficient to additionally maintain smaller packs like 650mAh or 450mAh batteries without having to modify mounts, including some comfort.
The AcroBee75 weighs 36.6g with out a battery. With a BetaFPV 2S 450mAh LiPo, the entire weight is 64.5g, and with a Tattu 2S 850mAh, it weighs in at 76.2g.
Indoor and Outside Flights
Whereas the AcroBee75 is technically able to flying indoors, its 2S setup makes it fairly highly effective and quick, which might make indoor flights difficult in an average-sized home. Flying a 1S 75mm whoop indoor is fairly onerous, the additional thrust from 2S means throttle administration can much more difficult, particularly for novices. In the event you’re simply beginning out in FPV, I like to recommend getting snug flying outside earlier than making an attempt indoor flights in tight areas. If indoor flying is your main purpose, particularly in smaller areas, you would possibly wish to think about a 1S whoop just like the Air65 for higher management and ease of use: https://oscarliang.com/betafpv-air65/
In my expertise, the AcroBee75 is extra suited in out of doors environments. The elevated energy from the 2S battery setup and the 14,000KV motors make it ultimate for quick, aggressive flying. It handles bigger maneuvers and fast strikes with ease, making it a enjoyable and versatile flyer. Nonetheless, in case you’re primarily flying outside, I might think about a ductless micro drone, just like the 2S 3″ quad I beforehand constructed, which tends to be quicker, extra environment friendly, and higher at dealing with wind because of the lack of duct weight. The AcroBee75’s essential benefit lies in its propeller guards, which add a layer of safety, particularly when flying round individuals or in tighter areas.
Flight Efficiency
The AcroBee75 on 2S is quite a lot of enjoyable to fly. The flight efficiency met my expectations—it’s precisely what you’d need from a 75mm whoop. With a 2S 850mAh battery, it hovers at round 35% throttle, it’s not not overly highly effective and management feels manageable, making it extra beginner-friendly in comparison with different, extra highly effective freestyle-oriented 2S FPV drones. The drone is fairly locked in and responding effectively to stay inputs. I didn’t discover any vital bounce-back or extreme propwash.
By way of effectivity, I achieved over 8 minutes of flight time with a 2S 850mAh battery, mixing acro flying and cruising. Utilizing a smaller 2S 450mAh battery decreased flight time to about 4 minutes, and I additionally seen extra voltage sag. I like to recommend sticking with bigger packs like 850mAh for extra balanced efficiency, particularly in windy circumstances, the place the additional weight truly helps stability. For instance, I flew this quad in 20MPH winds as proven within the video, and whereas not ultimate, it remained manageable. In calm climate, the drone performs even higher.
As for sign and vary, they’re spectacular. Due to the variety ExpressLRS receiver and the 400mW VTX, you would theoretically fly 1km to 2km with out subject. Nonetheless, I don’t suggest novices try flying that far—discovering this tiny quad in bushes after a crash may very well be a problem!
What Can Be Improved
There are a couple of areas that may very well be improved with the Acrobee75.
One of many essential points I encountered was with the OSD (On-Display screen Show). The OSD textual content would randomly disappear for a couple of seconds earlier than reappearing. Whereas not a deal-breaker, this may be distracting throughout flights.
The Betaflight configuration additionally wants some refinement. For instance, the present sensor wasn’t correctly calibrated and it was under-reporting, and the RSSI warning was set too excessive, triggering alerts prematurely. Adjusting these settings would enhance the general expertise.
I discovered the FPV digicam barely too darkish, even with the brightness on my goggles set to most. It may be the dearth of dynamic vary, which made the shadows seem too darkish, particularly when flying on a sunny day.
Regardless that the AcroBee75 has prop guards, I misplaced a couple of propellers on my first day of testing on account of crashes. The props are press-fitted onto skinny motor shafts, which makes changing them straightforward, however they’ll additionally come off simply as simply. I like to recommend retaining additional props available.
The U.FL connector for the VTX antenna is well-secured however may gain advantage from a dab of glue for added safety, particularly for these vulnerable to crashes. I recommend utilizing a pliable glue like E6000 moderately than sizzling glue, which tends to soften because of the warmth from the VTX.
Moreover, the drone doesn’t stand flat when utilizing a big battery mounted on the underside, making takeoffs a bit difficult at occasions.
Find out how to Setup
Establishing the AcroBee75 in your first flight is pretty easy. Right here’s the included person guide.
The drone’s flight controller comes preloaded with Betaflight 4.5.0 firmware, and the board goal is ARCOBEE_75. The ESC firmware is Bluejay 0.19 48KHz with the goal Z-H-40.
Binding the Receiver:
- The built-in receiver makes use of ELRS 3.4.3 firmware with the goal NewBeeDrone Range 2.4GHz RX.
- Plug within the flight controller USB cable to energy the receiver. After a minute, the receiver will enter WiFi mode.
- Join your cellphone to the ExpressLRS RX WiFi hotspot and open a browser. Go to the IP tackle 10.0.0.1 to entry the ExpressLRS internet interface, and enter your bind phrase there.
- You may also comply with different binding strategies supplied within the directions: https://oscarliang.com/bind-expresslrs-receivers/
Betaflight Configuration:
- Configuration: Allow DShot beacon and set the arming angle to 180°.
- PID Tuning: Alter the charges to your private preferences.
- Modes: Assign switches for arming, angle mode, beeper, and turtle mode.
- OSD: Arrange the OSD to show RSSI_dBm and hyperlink high quality. Take away the RSSI worth, and modify the RSSI warning threshold to a decrease worth, reminiscent of -90.
Conclusion: Is the AcroBee75 Value It?
The NewBeeDrone AcroBee75 BLV5 is a superb selection for pilots in search of a sturdy 2S analog Tiny Whoop. Whereas it’s not the most suitable choice for tight indoor areas, it’s extra fitted to out of doors environments and bigger indoor areas, and the additional safety from the propeller guards is effective. Its flight efficiency is clean and environment friendly, sturdiness is spectacular, and the general construct high quality is first rate. My solely minor concern is the occasional flickering OSD, not a deal breaker by any means, only a bit distracting.
