On this tutorial, I’ll information you thru organising the DJI O4 Lite Air Unit in any FPV drone. This consists of wiring it to the flight controller, configuring Betaflight OSD, and sharing helpful suggestions together with the finest transmission and digital camera settings to attain optimum efficiency to your particular wants.
Nonetheless debating whether or not to get the DJI O4 Lite? Try my evaluation: https://oscarliang.com/dji-o4-air-unit-lite/
The place to Purchase?
You should purchase the DJI O4 Lite Air Unit from the next retailers:
Presently, elements are usually not offered individually, that means for those who break the digital camera or transmission module, you’d have to switch your complete air unit. Hopefully, spare elements will change into obtainable sooner or later to make repairs extra reasonably priced. Nonetheless, the antenna is definitely detachable and replaceable.
Mounting
The O4 Lite Air Unit is designed for micro-sized FPV drones, similar to tinywhoop and ultralight quads. Since these small drones usually use a flight controller with a 25.5×25.5mm mounting sample, it’s potential to mount the O4 AU instantly on prime as a part of a single stack.
Many trendy frames have devoted areas within the rear for mounting the VTX, however this will likely not all the time work for the O4 Lite as a consequence of its quick digital camera cable (solely 5cm lengthy).
Picture Credit score: Calpulz
The actual problem is mounting the digital camera as a consequence of its unconventional mounting system. In case you have entry to a 3D printer, you possibly can design a customized mount to your current body. In any other case, you may have to buy a brand new body designed particularly for the DJI O4 Lite. Simply to call a few these new frames:
Moreover, make sure that the antenna is securely strapped to one thing like the cover. The antenna is simply friction-fitted, that means the U.FL connector may pop off in a crash.
Disconnecting Digital camera and Antenna
It’s potential to disconnect the digital camera from the transmission module, however the coaxial cable/connectors are glued in place. Until you’ll be able to reapply the glue after reconnection, I don’t suggest disconnecting them. Eradicating or changing the antenna is easy although.
Powering the O4 Lite
The O4 Air Unit (Lite) could be powered instantly from a 1S, 2S, or 3S LiPo battery (3.7–13.2V). Nonetheless, the Air Unit could change into unreliable and even shut down when the voltage drops beneath 3.7V. Subsequently, it’s not really useful to energy the O4 Air Unit instantly from a 1S LiPo. As an alternative, energy it from a steady 5V or 9V BEC on the flight controller, which additionally gives extra safety towards voltage spikes.
Energy necessities:
- Max energy consumption: ~6W
- Present draw at 700mW: 5V 1.2A or 9V 0.67A
- Beneficial BEC: Minimal 5V 2A BEC or 9V 1A BEC (In case you have different power-hungry gadgets, think about using a higher-rated BEC)
Flight Controller Connection
The DJI O4 Lite Air Unit makes use of the identical 6-pin connector and pinout because the O3 and O4 Professional, making it plug-and-play with any flight controller designed for current DJI Air Models. Nonetheless, it is best to all the time double-check the wiring upon connection to keep away from any surprises.
Pinout of the 6-pin connector:
- VCC: Energy provide
- GND: Floor
- RX/TX: Required for OSD and telemetry (e.g., displaying battery voltage and arming detection)
- GND and SBUS: For DJI Distant Controller (non-compulsory)
Not like the O4 Professional, the O4 Lite doesn’t have solder pads. If you wish to solder it on to the flight controller, you will want to lower off the connector from the cable and strip the wires.
In case you are not utilizing a DJI Distant to manage the drone, and are as an alternative utilizing your personal radio receiver, it’s really useful to take away the SBUS wire (DJI HDL) from the connector. This will forestall potential conflicts. Use a pointy device, similar to a pin or needle, to barely carry the tab within the connector and pull the wire out. On this case you may additionally take away the extra floor wire (brown).
Activation
As soon as the O4 Lite is related to the flight controller (FC), it’s time to activate it. If the Air Unit was beforehand activated, this step shouldn’t be required.
Professional Tip: that the O4 Air Unit have to be powered by a battery or a accurately rated energy provide throughout activation. Not like the O3, it can’t be activated utilizing simply the USB-C cable. Though the USB-C cable shouldn’t be included, any USB-C knowledge cable will work.
Obtain DJI Assistant 2 (Client Drone Sequence): https://www.dji.com/nl/downloads/softwares/dji-assistant-2-consumer-drones-series.
In case you have put in it, it’s nonetheless a good suggestion to obtain and re-install the most recent model.
Professional Tip: activation CANNOT be performed within the DJI Fly App.
Firmware Replace
Whereas related to DJI Assistant 2, examine if new firmware is obtainable to your O4.
Professional Tip: For firmware updates, you’ll be able to safely unplug the battery through the course of to keep away from heating.
Pairing DJI Goggles 3 with O4 Lite
Earlier than pairing, guarantee your Goggles 3 firmware is up to date to the most recent model. With out this replace, you received’t get the O4 Professional and O4 choices within the menu. Observe these steps:
Replace Firmware
- Activate the Goggles 3 and join them to your pc utilizing a USB-C knowledge cable.
- Replace the firmware by way of DJI Assistant 2.
Professional Tip: If the Goggles 3 doesn’t seem in DJI Assistant 2, navigate to the goggles menu:
Settings → About → OTG Wired Connection and allow it.
Choose O4 Air Unit Professional within the Goggles Menu
- Go to the goggles menu, navigate to Standing → Swap, and choose “DJI O4 Air Unit.”
Enter Bind Mode
- Press and maintain the facility button on the goggles till they begin beeping, indicating they’re in bind mode.
Energy on the O4 Air Unit
- Watch for the LED on the Air Unit to show pink.
- Press the bind button on the Air Unit. The pink LED will start flashing slowly, indicating it’s in bind mode.
Full Binding
- Binding is profitable when the LED on the Air Unit turns stable inexperienced, and the goggles show the digital camera feed.
Pairing Goggles 2/Integra with O4 Lite
To make use of the O4 Air Unit with Goggles 2 (or Integra), you’ll have to replace the firmware on each gadgets. And don’t fear, you’ll nonetheless get compatibility with the O3 Air Unit, in addition to older DJI FPV Air Models and the Vista system.
Professional Tip: Should you’re utilizing a Mac and encounter connection points (e.g., Goggles 2 not showing in DJI Assistant 2), this can be a recognized drawback. Sadly, there isn’t a dependable repair. A workaround is to replace utilizing the DJI Fly App in your smartphone or change to a Home windows PC for the firmware replace.
After the replace, go to the goggles menu and choose both O4 Air Unit or O3 Air Unit below the settings.
Press the hyperlink button between the lenses on the Goggles 2 to enter bind mode.
Energy on the O4 Air Unit and look forward to the LED to change into pink. Press the bind button on the Air Unit. The pink LED will flash, indicating bind mode. Binding is profitable when the LED turns stable inexperienced, and the digital camera feed seems in your goggles.
Switching Between Professional and Lite
Should you use each the O4 Professional and O4 Lite, bear in mind to modify between them within the goggles menu earlier than flying. Every time you fly with a distinct unit, you’ll have to manually choose the corresponding Air Unit within the goggles settings.
Unlock FCC Mode
In case your Goggles 3 are shipped with CE mode (to adjust to European rules), they are going to be restricted when it comes to output energy (solely 25mW) and channels. There will likely be only one obtainable channel within the 40MHz mode and three obtainable channels within the 20MHz mode.
In FCC mode, it is best to have the utmost 1200mW output energy possibility, and there must be 7 obtainable channels within the 20MHz mode, and three obtainable channels within the 40MHz and 60MHz mode.
For goggles in CE mode, it’s potential to carry out the “FCC hack” to unlock greater output energy (extra vary and sign penetration) and extra channels (permits extra pilots within the air on the identical time), however solely do that if it’s authorized the place you fly.
To modify to FCC mode, merely get the file “ham_cfg_support”, unzip it to the basis listing of the SD card and put it within the goggles, energy on goggles, that’s it.
Obtain file right here: https://drive.google.com/file/d/1ug2U_i5kdrKQQ2I17NLJBXm2tKQeNj5Q/view?usp=share_link
To examine in case you are in FCC mode, go to Settings => Transmission => Channel Mode, change to Guide, below 40MHz or 60MHz bandwidth, it is best to see 3 channels obtainable in FCC mode. If it is going to solely present 1 channel there, you might be in CE mode.
As soon as FCC mode is unlocked, you received’t need to do it once more. You’ll be able to return to CE mode by manufacturing unit reset the goggles (within the menu Settings => About).
Setup OSD in Betaflight
The DJI O4 Air Unit totally helps the Betaflight OSD, together with the Betaflight OSD menu and all obtainable OSD parts.
Go to the Presets tab, and seek for “dji”, the “FPV.WTF MSP-OSD” preset ought to pop up. In choices, choose the UART you’ve gotten related to the O4 Lite Air Unit.
To allow HD OSD, go to the settings menu within the goggles, Settings > Show > Canvas Mode, and choose HD OSD.
This lets you show the OSD with smaller fonts and drag OSD parts all the best way to the perimeters of the display screen. If you choose Regular Mode, the font will seem a lot bigger.
Lastly, go to the OSD tab in Betaflight Configurator. Below Video Format, guarantee HD is chosen.
Setup DJI Distant Controller
Should you’re utilizing a third-party radio hyperlink, you’ll be able to skip this part.
Utilizing DJI’s distant controller eliminates the necessity to wire a separate radio receiver to the flight controller, because the DJI O4 Air Unit additionally serves as an RC hyperlink. This simplifies the setup course of. Nonetheless, there are a couple of downsides to contemplate:
- Primary performance: DJI’s distant controllers lack the superior options and management precision provided by extra subtle methods like ExpressLRS.
- Failsafe dependency: Because the video and radio indicators share the identical hyperlink, shedding the video sign additionally ends in a failsafe, which isn’t the case with superior RC hyperlinks like ExpressLRS that usually outperform video hyperlinks considerably.
Appropriate DJI Distant Controllers:
- RC2: Works solely with the Goggles 2 and Integra.
- RC3: Works solely with the Goggles 3 and N3.
Pairing the DJI Distant Controller 3:
- Energy in your goggles 3 and RC3.
- Lengthy-press the energy button on each the goggles and distant controller to enter linking mode.
- As soon as the gadgets are efficiently linked:
- The goggles will cease beeping and show the dwell view.
- The distant controller will cease beeping.
Configuring Betaflight:
- Within the Ports tab, allow Serial RX for the UART related to the SBUS wire.
- Within the Receiver tab, set the protocol to SBUS (by way of UART).
Movies Recording
The O4 Air Unit has 23GB of onboard reminiscence for recording flight footage. Relying on the decision you choose, it could retailer roughly 30 to 45 minutes of recordings. Sadly, it doesn’t assist micro SD playing cards, so make sure that to offload footage often; in any other case, the unit may cease recording till you unlock reminiscence.
You’ll be able to begin recording by utilizing the Document button within the goggles’ prime menu. Alternatively, you’ll be able to configure the O4 Air Unit to begin recording robotically whenever you arm the quad within the system menu. Navigate to Settings → Digital camera → Superior Digital camera Settings to allow this feature, which many pilots discover extra handy.
Obtainable Resolutions & Body Charges:
- 4K 60fps
- 4K 50fps
- 4K 30fps
- 1080p 120fps
- 1080p 100fps
- 1080p 60fps
- 1080p 50fps
- 1080p 30fps
Obtain Video
To obtain movies, plug within the USB cable, an exterior drive will seem in your pc, containing all of the recorded footage. To obtain video off the Goggles, it is best to energy them on first, in any other case connecting the USB cable does nothing.
Video Stabilization
Video stabilization helps easy out flight footage by decreasing shakiness and vibrations. The O4 Air Unit helps two stabilization strategies: RockSteady and Gyroflow.
- RockSteady is built-in and could be enabled within the goggles’ menu. It stabilizes footage robotically throughout recording, providing first rate outcomes with minimal effort. To allow RockSteady, set Recording Stabilization to ON.
- Gyroflow is an open-source, software-based stabilization device that gives extra flexibility. It permits you to fine-tune stabilization settings in post-processing. With Gyroflow, the uncooked footage stays unstabilized, providing you with full management over how a lot stabilization to use. To make use of Gyroflow, set Recording Stabilization to OFF.
For finest outcomes with Gyroflow, use the next settings:
- Side Ratio: 4:3
- Digital camera FOV: Broad
- Recording Stabilization: OFF
Gyroflow is simple to make use of, and I’ve created a tutorial explaining the way it works: https://oscarliang.com/gyroflow/
Find out how to Keep away from Jello and Vibration
Just like the O3, the O4 digital camera is very delicate to vibrations, making it essential to isolate the digital camera from vibration sources or remove vibrations altogether.
Keep away from utilizing 24kHz PWM frequency in your ESC settings, as decrease PWM frequencies can improve vibrations and noise. As an alternative, use a greater frequency, similar to 48kHz, for optimum efficiency.
Mounting the O4 digital camera instantly on carbon fiber or CNC aluminum is not really useful, as vibrations can switch instantly from the motors to the digital camera, inflicting jello in your footage. As an alternative, use a gentle mounting materials that gives vibration dampening. Many new frames embrace silicone or rubber inserts/spacers particularly designed for mounting the O4 FPV cameras, serving to to cut back vibrations considerably.
Greatest O4 Professional Settings
Not like the O4 Air Unit Professional, the usual O4 Air Unit solely helps one shade mode: Regular. There’s no D-Log M mode, which is most popular by cinematographers. Whereas this will likely restrict superior shade grading choices, it simplifies the decision-making when selecting the very best settings.
Not like the O4 Air Unit Professional, the O4 Air Unit solely has one shade mode: Regular. There isn’t any D-Log M mode which is most popular by cinetographers. However this limitation additionally makes our resolution simpler in relation to what settings we should always run.
Beneficial Digital camera Settings for the Greatest FPV Expertise (For individuals who prioritize low latency and don’t care a lot about recording high quality):
- Side Ratio 4:3
- Video High quality: 1080p 100fps (affords the bottom latency)
- Digital camera FOV: Broad
- Auto ISO Restrict: 6400
- Auto Mode
Beneficial Digital camera Settings for the Greatest HD Recording (For these Utilizing ND filter, Gyroflow stabilization, and Colour grading):
- Side Ratio 4:3
- Video High quality: 4K 60fps (30fps could be higher for low mild, however it could improve latency, making correct flying tougher.)
- Digital camera FOV: Broad
- Recording Stabilization: OFF
- Sharpness: -2 (you’ll be able to improve sharpness in post-editing if wanted)
- Noise Discount: 0 (or +1 in low-light conditions to cut back noise in darkish areas)
- Digital camera Mode: Guide
- Shutter Velocity: 1/120
- Auto ISO
- Auto ISO Restrict: 200 – (set this as little as potential to keep away from graininess; nonetheless, too low may make the picture too darkish.)
- White Steadiness: Put White Steadiness on Auto first and see what the system select, then lock in with that worth, so WB is fastened throughout flight
Beneficial Digital camera Settings for First rate HD Recording (For individuals who favor little to no enhancing):
- Side Ratio 4:3
- Video High quality: 4K 60fps
- Digital camera FOV: Regular
- Auto ISO Restrict: Set as little as potential to your lighting circumstances. If uncertain, go away it on the default (6400). Be aware that greater ISO could result in grainier photographs in darkish areas, nevertheless it ensures visibility.
- Recording Stabilization: ON
- Colour: Regular
- Digital camera Mode: Auto
- White Steadiness: Auto
Beneficial Transmission Settings for Solo Flying
- Race Mode: OFF
- Transmission Energy: Use the best energy stage legally allowed, or simply set it to Auto.
- Channel Mode: Guide
- Bandwidth: 60MHz (60mbps bitrate)
Beneficial Transmission Settings When Flying with Different Pilots
- When flying with different DJI pilots: Contemplate decreasing transmission energy and utilizing smaller bandwidth.
- When flying with pilots utilizing different FPV methods (e.g., Analog, HDZero): Allow Race Mode to cut back interference.
Race Mode
Race Mode is a function designed particularly for FPV racing, obtainable solely on the DJI Goggles 3 and N3, however not on the Goggles 2 and Integra as a consequence of {hardware} limitations. It optimizes the system for low-latency efficiency and minimizes interference in race environments by aligning its channel frequencies to Race band. Right here’s what Race Mode affords:
- Lowest Latency: Race Mode forces the system into 100fps with a 20MHz bandwidth, reaching latency as little as 20ms.
- Channel Alignment: Channels align with normal race band frequencies, making it extra appropriate with different FPV methods.
- Cleaner Sign: The telemetry hyperlink now operates on the identical static frequency because the video sign, decreasing interference with different pilots. When the Air Unit is off, the goggles cease transmitting altogether, permitting pilots to stroll round with out affecting others.
- Commerce-offs: Narrower bandwidth and decrease energy output cut back vary and penetration, making it unsuitable for freestyle, cinematic, or long-range flying. Nonetheless, these limitations are acceptable for racing, which usually happens in open fields.
Warning: Keep away from powering in your Air Unit whereas others are within the air, because it momentarily sweeps throughout the band, doubtlessly inflicting interference for many who are nonetheless within the air. For all different forms of flying, regular mode affords higher RF efficiency.
Transmission Energy Effective Tune
This function permits you to fine-tune the output energy of your VTX by ±1mW to ±7mW to make sure compliance with racing occasion rules. For many customers, this setting isn’t essential until you’re attending a regulated racing occasion the place exact energy ranges are required.
Spectator Mode
The Spectator Mode permits you to watch different pilots flying with the O4 Air Unit, nevertheless it comes with compatibility limitations:
- Goggles 3 and N3 customers can solely spectate different pilots utilizing G3 and N3.
- Goggles 2 and Integra can solely spectate different pilots utilizing G2 and Integra.
Spectator Mode doesn’t work throughout these two generations, so make sure you’re utilizing the identical era goggles because the pilot you wish to spectate.
Conclusion
Organising the DJI O4 Lite Air Unit to your FPV drone is easy, particularly for those who comply with the wiring, mounting, and configuration steps outlined on this information. Whereas the O4 Lite has some limitations in comparison with the O4 Professional, it stays a strong and light-weight possibility for micro FPV drones. Ensure that to often offload recorded footage, optimize mounting for the antenna and digital camera, and select a dependable energy supply to make sure the very best efficiency. Completely happy flying!
