The SpeedyBee F405 AIO 40A Flight Controller is a strong addition to the FPV world, providing a compact but feature-rich package deal for two″ to five″ FPV drones. Not too long ago, I reviewed the SpeedyBee Bee25, a cinewhoop powered by this very board, and its efficiency left an enduring impression. Right now, we’ll dive into what makes the SpeedyBee F405 AIO stand out, its options, and whether or not it’s the right selection on your subsequent construct.
Find out about flight controllers in our purchaser’s information: https://oscarliang.com/flight-controller/
The place to Purchase
You will get the SpeedyBee F405 AIO FC from:
The equipment comes with helpful equipment:
- USB-C Extension Board: Permits easy accessibility to the USB port when the board is mounted contained in the body.
- LED Strip Energy Distribution Board: Simplifies connecting a number of LED strips.
- Exterior BEC: Ideally suited for powering VTX or different peripherals in a 6S setup.
- {Hardware}: Consists of screws, further grommets, and a big capacitor.
- Soldering Observe Board: Excellent for rookies trying to hone their soldering abilities earlier than engaged on the flight controller.
Specs
FC Specs:
- MCU: STM32F405
- Gyro: ICM-42688P
- USB Port Kind: Kind-C
- Barometer: SPA06-003
- OSD: Supported
- Bluetooth: Supported
- Wi-fi Firmware Replace: Supported (no must press the bodily BOOT button)
- Wi-fi Blackbox Evaluation: Not supported
- DJI Air Unit Connection:
- Helps 6-pin direct insertion and soldering
- Suitable with DJI O3/RunCam Hyperlink/Caddx Vista with out altering wire order
- Flash (Blackbox): 8MB
- Betaflight CC Pads (Digicam Parameter Adjustment): Supported
- Enter Voltage: 3S-6S LiPo battery
- 4V5 Output: Two outputs, whole 1A
- 5V BEC Output: Three outputs, whole 2A (shared with 4V5)
- 9V BEC Output: None (exterior BEC module included, switchable between 5V and 9V; whole 2A output)
- Motor Pads: M1-M4
- UART Ports:
- 4 full-function UARTs (UART3, UART4, UART5, UART6)
- SBUS (R2)
- ESC Telemetry: Not supported
- I2C: Supported
- LED Pads: Supported (for WS2812 LED management)
- Buzzer Pads: Supported (BZ+ and BZ- pads)
- BOOT Button: Supported (for DFU mode and firmware restoration)
- RSSI Pads: None
- SmartPort: Not supported
- Supported Firmware:
- BetaFlight (Default)
- INAV
- Firmware Goal Title: SPEEDYBEE F405AIO
- Mounting: 25.5 x 25.5mm, 2mm gap diameter
- Dimensions: 33.0mm x 33.0mm x 8mm
- Weight: 13.6g (together with CNC)
ESC Specs:
- Enter Voltage: 3-6S LiPo battery
- Steady Present: 40A
- Burst Present: 45A (10 seconds)
- ESC Protocol: Helps DSHOT600/300 (use different protocols with warning)
- Output Voltage: VBAT battery voltage (to energy the flight controller)
- Present Sensor: Supported (Scale = 254, Offset = 0)
- Firmware: Bluejay JH-40, 48kHz
Design and Construct High quality
The SpeedyBee F405 AIO has a definite look, with giant purple heatsinks on each side of the board. These aren’t simply aesthetic—they enhance cooling and supply added bodily safety in crashes. The premium purple end makes the board stand out in comparison with the extra widespread black or inexperienced PCBs.
Regardless of its compact dimension of 33x33mm, the F405 AIO packs a punch. It’s sufficiently small for two″ builds, and it helps currents as much as 40A, making it additionally appropriate for as much as 5-inch builds, offered you’re not pushing the motors to their absolute limits. The flight controller has built-in 5V 2A BEC and a 9V 2A BEC, that are excellent for powering LEDs, VTXs, and cameras. Moreover, its 25.5×25.5mm mounting holes make it suitable with a variety of frames.
Weight and Dimension Concerns
Weighing 13.4 grams, the F405 AIO is barely heavier than different AIO boards with related specs, which often weigh round 9 grams. The extra weight comes primarily from the heatsinks, including round 3-4 grams. Whereas this gained’t affect cinewhoops or 5-inch FPV drones considerably, it could possibly be a priority for ultra-light or sub-250g builds, the place each gram issues.
One other consideration is its thickness. At 8mm, it’s thicker than most AIO boards, which may have an effect on compatibility with compact frames. Be aware of the FC top when changing one other AIO flight controller, because it won’t match all builds.
Whereas the warmth sinks improve sturdiness and cooling, additionally they cowl many inner parts, making it tougher to establish sure pads. Fortunately, the included quick-start information is complete and extremely helpful. Preserve it helpful for soldering or troubleshooting.
Key Options
ESC Amp Score
The SpeedyBee F405 AIO encompasses a 40A 4in1 ESC, greater than sufficient for the typical 5-inch or smaller builds. The ESC comes pre-flashed with BlueJay firmware, supporting DShot300 and DShot600 protocols, enabling clean motor efficiency and exact flight controls. Massive motor pads make soldering simple, even for rookies.
4 UARTs
This flight controller provides 4 full UARTs for connecting peripherals equivalent to GPS, ExpressLRS/Crossfire receivers, VTX, and extra. There’s even an I2C connection, which is ideal for exterior compasses—very best for iNav customers or these trying so as to add extra superior navigation options.
Built-in Bluetooth
Similar to SpeedyBee’s different flight controllers, Bluetooth is offered on this board. Paired with the SpeedyBee app, you may wirelessly configure Betaflight settings, replace firmware, and even flash the board—no laptop computer required.
USB-C Extension
Some of the considerate options is the USB-C extension board. Whereas the FC has an onboard USB-C port, the breakout pads can help you join an exterior USB port and place it in a extra accessible location inside your body. That is significantly useful for cinewhoops with enclosed frames.
Built-in Blackbox Logging
For these working analog setups, the onboard OSD chip will show all of the important flight knowledge proper in your goggles. The board additionally options 8MB of Blackbox storage, which is crucial for tuning your quad.
5V and 9V Twin BEC
The F405 AIO has twin BECs—a 5V 2A for powering your receiver and different 5V units, and a 9V 2A particularly on your VTX. That is excellent for builds working digital methods just like the DJI O3 Air Unit, making certain steady energy supply even beneath heavy hundreds.
Equipment
The LED Pad Breakout Board makes soldering a number of LED strips simpler by splitting the LED sign into 4 particular person pads.
If the onboard BEC’s aren’t sufficient, additionally they included an exterior BEC which provides 9V or 5V output for extra energy.
Areas for Enchancment
Whereas the massive purple warmth sinks enhance cooling and sturdiness, they’ve some downsides:
- Entry Points: The heatsinks partially cowl a number of pads and boot button, making troubleshooting and soldering more difficult.
- Weight: The added weight (4–5 grams) could possibly be a priority for ultra-light builds.
- Non-Detachable Design: The heatsinks are glued on, making them extraordinarily troublesome to take away.
Within the Speedybee Bee25 BNF Cinewhoop, they used this precise F405 AIO FC with out heatsinks. I want they provided this heatsink-free model as properly for the weight-conscious builders. Or they may change the best way these heatsinks are mounted, as an illustration, as a substitute of glue they may simply use a few small screws.
Remaining Ideas
At simply $55, the SpeedyBee F405 AIO provides excellent worth, combining fashionable options with considerate design. Its Bluetooth integration, USB-C extension, and twin BECs make it one of the user-friendly AIO flight controllers obtainable at this time. The high-quality construct and premium look, coupled with wonderful efficiency, set it aside in its value vary.
Whether or not you’re constructing a cinewhoop, a freestyle quad, or an iNav GPS drone, the SpeedyBee F405 AIO is a incredible selection. It’s very best for individuals who need a stability of efficiency, reliability, and ease of use.
You will get the SpeedyBee F405 AIO FC from:
