E3D’s first-rate HotEnds will broaden your 3D printer’s capabilities – be taught the variations between these dynamic printer elements.
Usually imitated, however by no means duplicated, E3D HotEnds are the results of fantastic engineering. They’re the envy of sizzling finish makers all over the place as a result of E3D has by some means discovered the profitable design, machined to perfection. Purchase an off-brand replication on eBay, and likelihood is good that you just’ll remorse it as a result of vendor’s lack of ability to recreate the precise specs that E3D has gone to such lengths to get excellent.
Because of this, E3D HotEnds are the popular improve for the techs right here at MatterHackers, and we wholeheartedly advocate them, in addition to their many nozzle replacements, to our prospects.
The versatile E3D v6 All-metal HotEnd
E3D v6 HotEnd
The E3D v6 is the quintessential improve to any printer that’s sizzling finish merely isn’t performing. If clogs are a continuing downside for you, and also you’ve tried every little thing underneath the solar, change to a v6 and watch your troubles soften away.
Tech Specs:
- Temperature Vary: <=300°C (even greater with a thermocouple)
- Filament Dimension: 1.75mm or 3.00mm
- Nozzles: 1
- Building: All-metal
- Drive system: Bowden or Direct
E3D Lite6 HotEnd
In the event you’re on the lookout for a fundamental sizzling finish that may print PLA or ABS filament, the Lite6 is a less expensive various to the v6. It’s received PTFE components, so it prints as much as 245°C. It seems virtually similar to the v6, however the warmth sink has a barely totally different form and the fan shroud is a unique colour.
E3D Lite6 HotEnd
Tech Specs:
- Temperature Vary: <=245°C (limiting issue is PTFE; PTFE degrades greater than 245°C)
- Filament Dimension: 1.75mm
- Nozzles: 1
- Building: Metallic/PTFE
- Drive system: Bowden or Direct
E3D Cyclops HotEnd
For dual-extrusion printing with a lighter sizzling finish, the Cyclops is a singular setup. It options two inputs for 2 totally different colours of filament, and one output. That is helpful for machines like delta printers the place further weight on the tip effector platform can negatively have an effect on prints. Temperature is shared, so just one sort of filament (e.g. PLA) can print at one time.
Cyclops is the one system from E3D that makes use of its personal sort of nozzles, which aren’t suitable with the opposite sizzling ends.
E3D Cyclops HotEnd
Tech Specs:
- Temperature Vary: <=300°C (even greater with a thermocouple)
- Filament Dimension: 1.75mm solely
- Multi-extrusion: 2 filaments of the identical sort
- Nozzles: 1
- Building: All-metal
- Drive system: Bowden solely
E3D Chimera HotEnd
For multi-extrusion printing with the flexibility to individually management temperatures on every of the 2 nozzles, the Chimera is what you need. One massive warmth sink cools the chilly part for each extrusions, which can be utilized to print totally different colours or varieties of filament.
E3D Chimera HotEnd
Tech Specs:
- Temperature Vary: <=300°C (even greater with a thermocouple)
- Filament Dimension: 1.75mm solely
- Multi-extrusion: 2 differing types or colours of filaments
- Nozzles: 2
- Building: All-metal
- Drive system: Bowden solely
E3D Kraken HotEnd
The Kraken has 4 inputs and outputs for the final word multi-extrusion expertise. It’s water-cooled, so it doesn’t use any followers like the opposite sizzling finish programs from E3D. Help for this method remains to be fairly restricted, although, and is advisable just for superior customers.
E3D Kraken HotEnd
Tech Specs:
- Temperature Vary: <=300°C (even greater with a thermocouple)
- Filament Dimension: 1.75mm solely
- Multi-extrusion: 4 differing types or colours of filaments
- Nozzles: 4
- Building: All-metal
- Drive system: Bowden solely
E3D Volcano HotEnd Improve
To print extra filament, quicker, you need the Volcano. Not technically its personal sizzling finish system, it’s an improve to the v6, Chimera, or Kraken, however undoubtedly price mentioning. The warmth block and nozzle are each larger, so you may feed extra filament by way of at a faster charge.
E3D Volcano HotEnd Improve Package
Conclusion
In the event you’re after high-quality prints, the E3D HotEnds are the only option! As at all times, we’re blissful to reply any questions you might have, and sit up for serving to you with all of your printing wants.
