Up to date Could 19, 2026. Flashforge’s Creator 5 and Creator 5 Professional are actually in market, with the primary models delivery to deposit backers. Each printers use FlashSwap, a 4-toolhead tool-changer system that bodily swaps whole print heads as an alternative of feeding filament by a single shared nozzle. The result’s near-zero purge waste and dramatically sooner color adjustments.
Launch pricing stays reside by June 20, 2026. A $10 deposit unlocks the bottom launch worth of $649 for the Creator 5 and $799 for the Creator 5 Professional. After June 20, each fashions transfer to straightforward MSRP.
Marketing campaign window closes June 20, 2026. About one month remaining at launch pricing.
Now delivery
Flashforge Creator 5
Open body CoreXY | 4 toolheads | Close to-zero purge waste
$649
with $10 deposit
MSRP $799
Save $150 versus MSRP
The Creator 5 takes a basically totally different method to multi-colour printing. As a substitute of a single nozzle fed by an exterior filament hub, it has 4 unbiased toolheads that bodily swap out and in of place utilizing the FlashSwap system. There is no such thing as a purge block, no waste tower, and no filament loading cycle between color adjustments. Flashforge’s personal benchmark exhibits this in apply: a multi-colour Rubik’s Dice takes 2.6 hours and 47.5g of filament on the Creator 5 versus 16 hours and 290g on a traditional purge-based system. That’s 84% much less time and 84% much less materials. With 600mm/s print velocity, 30,000mm/s2 acceleration, and help for mixing PLA, TPU, PETG, PVA, and composite supplies concurrently in a single print, this can be a severe machine at an accessible worth.
Greatest for: Makers who do numerous multi-colour printing and wish to remove purge waste and ready time, printing primarily with PLA, PETG, TPU, and composites.
Now delivery
Flashforge Creator 5 Professional
Totally enclosed CoreXY | 4 toolheads | 65°C heated chamber | HEPA filtration
$799
with $10 deposit
MSRP $949
Save $150 versus MSRP
The Creator 5 Professional takes every part in the usual Creator 5 and provides a completely enclosed, actively heated chamber. The enclosure does two issues: it raises the inner temperature to 65°C for dependable printing of engineering supplies like ABS, ASA, PC, and PA that may warp in an open-frame machine, and it accommodates fumes from those self same supplies utilizing a dual-layer filtration system with an H13 HEPA medical-grade filter and premium coconut carbon. Noise is decreased from 65dB on the open Creator 5 to 55dB on the Professional. The Professional additionally switches to steady airflow cooling mode when printing PLA, PETG, and TPU with the door closed, so the enclosure isn’t just for engineering supplies however improves outcomes throughout the board. At $799 with a $10 deposit, it’s the lowest-priced enclosed 4-toolhead tool-changer at the moment out there.
Greatest for: Makers who want engineering materials help (ABS, ASA, PC, PA), care about air high quality, or desire a quieter machine appropriate for dwelling or workplace use.
Creator 5 vs Creator 5 Professional: which one to decide on?
Each printers use the identical FlashSwap 4-toolhead system and have similar construct volumes and print speeds. The $150 worth distinction buys you the enclosure, heated chamber, air filtration, and engineering materials help.
Select the Creator 5 when you print primarily with PLA, PETG, TPU, and composites and need the bottom entry worth. Select the Creator 5 Professional when you print engineering supplies, need air filtration for fumes from ABS or ASA, or want a quieter machine for a house or shared workspace. Notice that the Creator 5 can’t be upgraded to the Professional later as they’ve structural variations and are offered individually.
Marketing campaign perks nonetheless reside by June 20
The launch window stays open for a couple of month. Prospects who place an order earlier than June 20, 2026 nonetheless obtain the next advantages on high of the launch worth.
$10 Deposit Locks Lowest Value
A $10 deposit at checkout unlocks the bottom launch pricing of $649 (Creator 5) or $799 (Creator 5 Professional), $50 beneath the no-deposit pre-sale worth. The deposit is non-refundable and utilized as a credit score towards last fee.
$50 Air Delivery Improve
Air freight improve for simply $50, subsidised by Flashforge. Restricted to the primary 2,000 Creator 5 and 1,000 Creator 5 Professional last fee clients throughout the marketing campaign. Choose worldwide areas; contact Flashforge help to substantiate your space.
1-in-100 Free Unit Draw
Each one hundredth order wins a full-value present card, successfully a free printer. No entry wanted, simply full your buy. One prize per order.
180-Day Value Assure
If the official worth drops inside 180 days of your buy, Flashforge will refund you the distinction robotically. The bottom worth post-launch is assured for early consumers.
Regional launch pricing
US pricing is proven above. Equal launch pricing with $10 deposit is accessible in different areas.
Notice on pricing and availability: Launch pricing of $649 (Creator 5) and $799 (Creator 5 Professional) with a $10 deposit is accessible by June 20, 2026. First models are actually delivery from China to deposit backers, with precedence given to early backers forward of the final queue. The Creator 5 and Creator 5 Professional are separate merchandise and can’t be upgraded between fashions after buy. Regional pricing applies; examine the Flashforge product web page on your native forex.
