3D mannequin description
This mannequin is separated into components and every half is lower to slot in a printer with a platform dimension of 200mm x 200mm x 200mm.
There’s a image with components labeled to their file names within the preview part which you’ll be able to seek advice from.
I additionally embody a mixed model simply in case you want it.
There are footage with set up information within the preview part which you’ll be able to seek advice from. Please learn and perceive the content material earlier than star the undertaking. Will probably be fairly difficult in case you have no thought on what’s the built-in peg and cavities made on the mannequin is used for.
Further sanding are required on the built-in peg relying on how clear the helps are eliminated (if any utilized) and the print high quality. The zig-zag lower on the blade might have further sanding to make sure a clean insert as effectively.
You’ll need iron rod with diameter as much as 3mm and 20mm in size to bridge the floating part (F1-F5). Whether it is an excessive amount of give you the results you want, you possibly can skip putting in them and refill the outlet on half 3 utilizing putty or clay.
The “half-round peg” is ridiculously small and never very best to print. Print provided that you actually cannot discover any choice to bridge the floating part.
For scaling, please use the identical scale for all of the components and items.
Cheers and Comfortable Printing!
3D printing settings
Dimension: 1099mm x 251.83mm x 192mm